地铁运营系统安全综合评价指标体系研究

分析地铁运营系统的特点、运营模式、系统故障模式,并运用系统工程的理论原则,从系统外部因素、系统指挥因素、设备设施因素、运营管理因素4个方面,确立地铁运营系统安全综合评价指标体系,利用模糊数学综合评价法,建立了地铁运营系统安全综合评价模型,并通过典型实例进行综合分析评价,进而证明将模糊数学理论应用于地铁安全综合评价的可行性。通过地铁运营系统安全指标体系和评价方法的研究和探索,对正确评价地铁系统运营安全现状,修正偏差,提高地铁系统安全总体水平具有十分重要的意义。     

地铁运营系统危险有害因素辨识分析

地铁系统发生事故,后果不堪设想。笔者在对国内外63起地铁典型事故分析的基础上,确定了地铁火灾、列车脱轨、拥挤踩踏、中毒窒息、列车撞车等危险有害因素,并对影响事故的后果严重度和发生频率进行了分析,给出了危险度计算查阅赋值表,从而确定了影响地铁运营的危险度,作出了量化分级,同时对可能导致事故的危险有害因素进行了分析,并对危险有害因素的防治对策进行了探讨。     

基于GIS的长江中下游地区洪灾风险分区及评价

国内外近几年的发展表明,在所有可能避免和减轻自然灾害的措施中,最简单有效的方法就是通过在科学研究基础上进行风险区划,将自然灾害管理提高到风险管理的水平.在长江流域数字化地图的基础上,选取不同重复期(20,50,100年),及包括1870年历史洪水和1931,1935,1954,1991,1995,1996,1998,1999和2002年共10次洪水,借助Arcview地理信息系统的空间分析和叠加功能,对长江中下游地区的洪水灾害危险性进行了初步评价.首先参考洪水灾害淹没图和相关历史文献记录资料,构建10次洪水受灾县(市)分布图;其次对这10次洪水受灾县(市)分布图进行叠加,得到长江中下游地区洪涝灾害风险性评价图.分析表明:长江中下游地区洪水风险的分布是有规律的,而且具有明显的地理意义.有4个明显的高危风险区,分别是洞庭湖、鄱阳湖两湖平原的湖滨地区和公安以下的长江中游河段的沿江一带,尤其是荆江河段以及两江相夹地势低洼的江汉平原;沿高危风险区外侧为高风险地区,重点在汉江下游、资、沅、澧水、清江流域、皖沿江地区以及太湖流域的部分地区;沿长江于高危风险和高风险地区两侧分别为风险较小地区;其他地区对于洪水灾害而言则为安全地区.评价结果与长江中下游的实际情况基本吻合.     

Reaction kinetics of waste sulfuric acid using H2O2 catalytic oxidation

The process of recovering waste sulfuric acids using H₂O₂ catalytic oxidation is studied in this paper. Activated carbon was used as catalyst. Main operating parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have effects on the removal of impurities from waste sulfuric acids. The reaction kinetics of H₂O₂ catalytic oxidation on impurities are discussed. At a temperature of 90°C, H₂O₂ feeding rate of 50 g (kg waste acid)^?1 per hour, and catalyst dosage of 0.2 wt% (waste acid weight), the removal efficiencies of COD and chrominance were both more than 99%, the recovery ratio of sulfuric acid was more than 95%, and the utilization ratio of H₂O₂ was 88.57%.

Implications: Waste sulfuric acid is a big environmental problem in China. The amount of waste sulfuric acid is huge every year. Many small and medium-sized businesses produced lots of waste acids, but they don’t have an appropriate method to treat and recover them. H₂O₂ catalytic oxidation has been used to treat and recover waste sulfuric acid and activated carbon is the catalyst here. Main parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have been investigated. The reaction kinetics are discussed. This method can be economical and feasible for most small and medium-sized businesses.     

负载纳米TiO_2凹凸棒黏土的制备表征及对Mn~(2+)的吸附性能

以溶胶-凝胶法制备了负载纳米TiO2凹凸棒黏土吸附剂,采用SEM、XRD等分析方法对负载纳米TiO2凹凸棒黏土前后的结构进行了表征,并对Mn2+进行了吸附性能的研究。结果表明:经过高温焙烧后的负载纳米TiO2凹凸棒黏土吸附剂较负载前的凹凸棒黏土,因其结构中的结晶水和沸石水脱失,内部孔道面积和表面积增加,活性吸附位点的数量增大,吸附能力有了明显提高。在室温条件下(20~25℃),pH为5~6,吸附平衡时间为120 min时,负载纳米TiO2凹凸棒黏土吸附剂对Mn2+有较好的吸附效果。     

锰铜铈氧化物催化剂氧化NO性能及动力学研究

实验以TiO2为载体采用浸渍法制备CuOx/TiO2、CeOx/TiO2、CuCeOx/TiO2和MnCuCeOx/TiO2催化剂,考察这些催化剂氧化NO活性,探究Cu、Ce摩尔比和添加Mn元素对CuCeOx/TiO2催化剂氧化NO活性的影响,使用扫描电镜观察催化剂表面结构。研究发现,Cu、Ce元素配合后的CuCeOx/TiO2催化剂氧化活性明显好于单独含Cu、Ce的催化剂,当Cu、Ce摩尔比为Cu:Ce=1∶2时,CuCeOx/TiO2催化剂氧化活性最好,在NO浓度500×10-6,O210%,空速为24 000 h-1,350℃时,NO氧化度为0.62;添加Mn元素可以提高CuCeOx/TiO2催化剂低温氧化活性,250℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度为0.53和0.69,300℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度均为0.76;此外,实验还研究了NO在MnCuCe/Ti-3催化剂上反应的动力学方程。     

全球升温1.5℃与2.0℃情景下长江中下游地区极端降水的变化特征

基于长江中下游地区1961~2100年区域气候模式COSMO-CLM(CCLM)模拟与1961~2005年气象站观测的逐日降水数据,通过统计计算年降水量、强降水量、暴雨日数和极端降水贡献率4个极端降水指数,研究全球升温1.5℃与2.0℃情景下,长江中下游地区极端降水的时空变化特征。结果表明:(1)全球升温1.5℃情景下,年降水量相对于1986~2005年减少5%,强降水量、暴雨日数和极端降水贡献率分别增加7%、33%和4%;概率密度曲线表明,年降水量均值下降,强降水量、暴雨日数和极端降水贡献率均值上升,极端降水方差增大;年降水量、强降水量和暴雨日数在空间上表现为南部增加北部减少,极端降水贡献率则相反。(2)全球升温2.0℃情景下,年降水量下降3%,强降水量、暴雨日数和极端降水贡献率分别上升15%、46%和15%;年降水量均值稍有减少且方差稍有上升,强降水量、暴雨日数和极端降水贡献率均值和方差明显增加;年降水量减少区域位于长江主干以北,强降水量、暴雨日数和极端降水贡献率表现为绝大部分地区增加的空间变化特征。(3)全球升温由1.5℃至2.0℃时,年降水量、强降水量、暴雨日数和极端降水贡献率分别增加3%、7%、10%和11%;随升温幅度的增加极端降水均值和方差上升;极端降水呈增加态势的范围扩大。因此,努力将升温控制在1.5℃对降低极端降水的影响具有重要意义。     

Effects of pig manure containing copper and zinc on microbial community assessed via phospholipids in soils

Pig manure (PM) is widely used as an organic fertilizer to increase yields of crops. Excessive application of compost containing relatively great concentrations of copper (Cu) and zinc (Zn) can change soil quality. To clarify the effects of different rates of application and to determine the optimal rate of fertilization, PM containing 1,115 mg Cu kg^?1, dry mass (dm) and 1,497 mg Zn kg^?1, dm was applied to alkaline soil at rates of 0, 11, 22, 44, 88, and 222 g PM kg^?1, dm. Phospholipid fatty acids (PLFAs) were used to assess soil microbial community composition. Application of PM resulted in greater concentrations of total nitrogen (TN), NH₄ ⁺-N, NO₃ ^?-N, total carbon (TC), soil organic matter (SOM) but lesser pH values. Soils with application rates of 88–222 g PM kg^?1, dm had concentrations of total and EDTA-extractable Cu and Zn significantly greater than those in soil without PM, and concentrations of T-Cu and T-Zn in these amended soils exceeded maximum limits set by standards in china. Except in the soil with a rate of 11 g PM kg^?1, dm, total bacterial and fungal PLFAs were directly proportional to rate of application of PM. Biomasses of bacteria and fungi were significantly greater in soils with application rates of 44–222 g PM kg^?1, dm than in the soil without PM. SOM, TC and EDTA-Zn had the most direct influence on soil microbial communities. To improve fertility of soils and maintain quality of soil, rate of application should be 22–44 g PM kg^?1 dm, soil containing Cu and Zn.     

Contamination status and potential release of trace metals in a mangrove forest sediment in Ho Chi Minh City,Vietnam

Can Gio district is located in the coastal area of Ho Chi Minh City, southern Vietnam. Discharge of wastewater from Ho Chi Minh City and neighboring provinces to the rivers of Can Gio has led to concerns about the accumulation of trace metals (As, Cu, Cr, Ni, Pb, and Zn) in the coastal sediments. The main objective of this study was to assess the distribution of As, Cu, Cr, Ni, Pb, and Zn in surface and core sediments and to evaluate the contamination status in relation to local background values, as well as the potential release of these selected trace metals from sediments to the water environment. Sediment characteristization, including determination of fine fraction, pH, organic matter, and major elements (Al, Fe, Ca, K, Mg, and S), was carried out to investigate which parameters affect the trace metal enrichment. Fine fraction and Al contents were found to be the controlling proxies affecting the distribution of trace metals while other sediment characteristics did not show any clear influence on trace metals’ distribution. Although As concentrations in the sediments were much higher compared to its reference value in other areas, the enrichment factor based on local background values suggests minor contamination of this element as well as for Cr, Cu, and Pb. Risk assessment suggested a medium to very high risk of Mn, Zn, and Ni under acidification. Of importance is also that trace metals in sediments were not easily mobilized by organic complexation based on their low extractabilities by ammonium-EDTA extraction.